Calibration
TestSafe Australia has an established calibration laboratory which calibrates and maintains equipment for TestSafe's laboratories, WorkCover NSW and commercial customers. It is currently undergoing assessment by NATA for the purposes of accreditation. This will enables the calibration laboratory to provide more services to industry.
Our calibration services include the following:
Pressure
- Pressure gauges from 10 Pa through to 40 MPa
- Pressure transducers, both static and dynamic and associated equipment
- Liquid manometers
- Electronic micromanometers
Air Flow
- Vane anemometers from 0.4 m/s to 18 m/s and up to 100 mm diameter
- Thermo-anemometers from 0.3 m/s to 30 m/s
- Rotameters from 20 cm3/min to 100 L/min
- Gas & vane type flowmeters up to 100 L/m
Gas Analyzers
- Oxygen analyzers and monitors
- Gas analyzers for various gases
- Atmosphere monitors
- Indoor air quality monitors
Torque Wrench
- Torque wrenches up to 300 nm
Non Destructive Rope Testers
- Sense heads up to 75 mm Diameter
- Consoles
Linear Dimension
- Micrometers - inside & external up to 300mm, vernier calipers up to 1 M
- Dial gauges up to 100mm
- Vernier height gauges and other measuring devices up to 300 mm
- LVDT up to 200mm
Mass
- Electronic and mechanical balances up to 60 kg
- Low-grade masses up to 60 kg
Electrical
- Digital Multimeters up to 4½ digit displays
- Analogue Multimeters
- Analogue and digital clamp meters
- AC voltage up to 1000 V at 5 kHz and 100 V at 20 kHz
- DC voltage up to 1000 V
- AC current up to 20 A at 5 kHz
- DC current up to 20 A
- Resistance up to 10 M?
- Insulation resistance testers
- Decade resistors
- Oscilloscopes, Counters and Signal & Pulse Generators - capability on request
Acoustic
- Sound level meters to Type 1
- Sound level calibrators
- Octave filters
- Audiometers
Temperature and Humidity
- Digital thermometers and data loggers up to 1200° C
- Thermocouples from - 20 to 1200 °C
- Platinum resistance thermometers up to 250° C
- Humidity indicators from 10 to 90% RH
- Humidity data loggers
- Humidity recorders
- Area heat stress monitors
Non Specified
Through our association with other calibration laboratories we can arrange for most other types of equipment to be calibrated.
To find out more about any of the above please use the enquiry form.
Published on 21th October 2005