Occupational Protective Helmets

• Respiratory Protective Devices
• Occupational Protective Helmets
• Industrial vacuum cleaners for particulates hazardous to health to AS 3544-1988
• Spray painting booths, designated spray-painting areas andpaint mixing rooms to AS/NZS 4114:2003
• Selective Testing of Eye Protectors for industrial applications AS/NZS 1337-1992
• Safety / Incident Investigations

General Requirements to AS/NZS 1801:1997

TestSafe Australia is NATA accredited for the following tests:

• Type 1 - General Industrial
• Type 2 - High Temperature Workplaces
• Type 3 - Bushfire Fighting

Testing of the following

• Dimensions
• Ventilation
• Conditioning - Hot 50°C, Cold -10°C,
  Wet-immersion @ 23°C
• Stiffness of helmet shell
• Electrical resistance
• Shock absorption 5kg mass
• Penetration resistance 3kg spike
• Resistance to ignition of helmet shell
• Prolonged high temperature stability @120°C
• Resistance to ignition of ear and neck protectors
• Thermal performance of helmet shell
• High radiant heat @ 200°C
• Retaining strap strength - high strength
  and specified breakpoint
• Marking

We will also consider undertaking test requirements to other standards or similar tests as required. Should you require any further information, please use our enquiry form.